|Photo: Alabastine Surface Preparation Repairs Walls White 330G Coral|
THE LINE The Alabastine Surface Preparation Repairs Walls Fills and corrects imperfections in mineral masonry substrates such as concrete, bricks, cement and plaster. Its special formula adheres excellently without shrinking or cracking.
Main Attributes: Ready to use.; Easy to sand, does not retract and does not crack; Fills up to 10mm in one application.
- Cor: BrancoTom: Off-Whites
- Surface: Masonry
- Area: Indoor/Outdoor
- Dilution: Ready to use.
- Yield: Not applicable
- Number of Coats: Not applicable.
Application: Make sure that the surface to be repaired is dry and free of loose parts. Press the tube between your fingers, then along its entire length to homogenize the product.
Apply the product directly to the damaged area, leveling it with a spatula. Make sure that at the end of the application it is level with the surface.
For holes with a depth greater than 10mm apply the 1st layer of the product, wait for it to dry and then apply a new layer.
Wait for the product to dry completely, and sand the area if necessary.
- Drying: To the touch: 30 minutes.
- Brush painting: 2 hours
- Roller painting: 3 hours
- Sanding: 4 hours
- Total drying: 1 day
- Pre-painting or painting: Pre-painting
- Water based: no
- Finishing: Not applicable
- Recommendation: It is recommended to read the package instructions before use.
- Validity: 24 months.
Alabastine Surface Preparation Repairs Walls White 330G Coral
Buy online at Partner Magalu:
|Você será redirecionado para a loja virtual Parceiro Magalu…|